Sanyo PLC-UF10 Owner's Manual

Also see for UF10 - PLC UXGA LCD Projector: Specifications Instruction manual

7PREPARATIONNAME OF EACH PART OF PROJECTORBOTTOM OF CABINETBACK OF CABINETHOT AIR EXHAUSTED !Air blown from exhaust vent is hot. Whenusing or installing a projector, followingprecautions should be taken. Do not put a flammable object near this vent. Keep rear grills at least 3’ (1m) away fromany object, especially heat-sensitive object. Do not touch this area, especially screwsand metallic parts. This area will becomehot while a projector is used.This projector detects internal temperatureand automatically controls operating powerof Cooling Fans.FRONT OF CABINETLAMP COVERADJUSTABLE FEETThis projector is equipped with coolingfans for protection from overheating.Pay attention to following to ensureproper ventilation and avoid a possiblerisk of fire and malfunction. Do not cover vent slots. Keep bottom clear of any objects.Obstructions may block cooling air.AIR INTAKE VENTSPROJECTION LENSSPEAKERSINFRAREDREMOTE RECEIVERLENS COVERPOWER CORDCONNECTOREXHAUST VENTMAIN ON / OFFSWITCHINFRAREDREMOTE RECEIVERCARRYING HANDLELEVEL AND TILT ADJUST HANDLEAIR FILTERADJUSTABLE FEETDo not turn on a projector with lens coverattached. High temperature from light beam maydamage lens cover and result in fire hazard.CAUTION