Sanyo PLC-UF10 Owner's Manual

Also see for UF10 - PLC UXGA LCD Projector: Specifications Instruction manual

35SELECTING INPUT SOURCEPress MENU button and ON-SCREEN MENU will appear. PressPOINT LEFT/RIGHT button to move a red frame pointer toINPUT Menu icon.Press POINT DOWN button to move a red arrow pointer to Input3 and then press SELECT button. Source Select Menu willappear.12Move a pointer to source andpress SELECT button.Source Select Menu (VIDEO)Move a pointer to source that you want to select and then pressSELECT button.3When video input signal is connected to VIDEO jack,select Video.VideoWhen video input signal is connected to S-VIDEO jack,select S-Video.S-VideoWhen video input signal is connected to VIDEO/Y, Cjacks, select Y, C.Y, CWhen connecting to those equipment, select a type of Videosource in SOURCE SELECT (VIDEO) Menu.WHEN SELECT INPUT 3 (AV TERMINAL )Press MENU button and ON-SCREEN MENU will appear. PressPOINT LEFT/RIGHT button to move a red frame pointer toINPUT Menu icon.Press POINT DOWN button and a red-arrow icon will appear.Move arrow to "Y, Pb/Cb, Pr/Cr" and then press SELECT button.13When connect component video output (Cr, Y, Cb or Pr, Y, Pb) fromvideo equipment to R/Pr, G/Y and B/Pb jacks.WHEN SELECT INPUT 2 (5 BNC SLOT )Input 2INPUT MENUMove a pointer toY, Pb/Cb, Pr/Cr and pressSELECT button.INPUT Menu iconMove a pointer (red arrow) toInput 2 and press SELECTbutton.Source Select MenuInput 3INPUT MENUINPUT Menu iconMove a pointer (red arrow) toInput 3 and press SELECTbutton.VIDEO INPUTPress POINT DOWN button to move a red arrow pointer to Input2 and then press SELECT button. Source Select Menu willappear.2