Sanyo PLC-UF10 Owner's Manual

Also see for UF10 - PLC UXGA LCD Projector: Specifications Instruction manual

38VIDEO INPUTPress POINT LEFT/RIGHT buttonsto adjust value.Press MENU button and ON-SCREEN MENU will appear. PressPOINT LEFT/RIGHT button(s) to move a red frame pointer toIMAGE ADJUST Menu icon.12 Press POINT DOWN button to move a red frame pointer to itemthat you want to adjust and then press SELECT button. Level ofeach item is displayed. Adjust each level by pressing POINTLEFT/RIGHT button(s).Move a red frame pointer toitem to be selected and thenpress SELECT button.IMAGE ADJUST MENUIMAGE LEVEL ADJUSTMENTPress POINT LEFT button to decrease contrast, and POINT RIGHTbutton to increase contrast. (From 0 to 63.)Press POINT LEFT button to adjust image darker, and POINTRIGHT button to adjust brighter. (From 0 to 63.)ContrastBrightnessPress either POINT LEFT button or POINT RIGHT button to obtainbetter balance of contrast. (From 0 to 15.)GammaPress SELECT button at this icon todisplay other items.IMAGE ADJUSTMenu iconPress POINT LEFT/RIGHT buttonsto adjust value.Press POINT LEFT button to lighten color, and POINT RIGHT buttonto deeper color. (From 0 to 63.)Press POINT LEFT button or POINT RIGHT button to obtain propercolor. (From 0 to 63.)ColorTintPress POINT LEFT button to soften image, and POINT RIGHTbutton to sharpen image. (From 0 to 15.)SharpnessPress POINT LEFT button to lighten red tone and POINT RIGHTbutton to deeper tone. (From 0 to 63.)White balance (Red)Press POINT LEFT button to lighten green tone and POINT RIGHTbutton to deeper tone. (From 0 to 63.)White balance (Green)Press POINT LEFT button to lighten blue tone and POINT RIGHTbutton to deeper tone. (From 0 to 63.)White balance (Blue)Press SELECT button at this icon tostore value.Press SELECT button at this icon todisplay previous items.Press POINT LEFT/RIGHT button(s) to change progressive scanmode. Dialog box display is changed to “Off” and progressive scanmode to off. Press POINT LEFT/RIGHT button(s) again, progressivescan mode to on.Press POINT LEFT/RIGHT button(s) to change noise reduction mode.Dialog box display is changed to “On to reduce noise (rough parts) ofimage. Press POINT LEFT/RIGHT button(s) again, to change noisereduction mode to off.Noise reductionProgressive scanNOTE :Tint cannot be adjusted when video system is PAL,SECAM, PAL-M or PAL-N.Noise Reduction cannot be operated when videosignal types and systems as follow. Composite video signal (SECAM, NTSC4.43,PAL-M and PAL-N systems). Y/C separate video and S-video signal (SECAM,PAL-M and PAL-N systems). Component video signal.Progressive cannot be operated when “480p”,“575p” or “720p” is selected on AV SYSTEMMENU (P36).