This projector uses nominal input voltages of 100–240 V AC andit automatically selects the correct input voltage. It is designed towork with single-phase power systems having a grounded neutralconductor. To reduce the risk of electrical shock, do not plug intoany other type of power system.If you are not sure of the type of power being supplied, consultyour authorized dealer or service center.Connect the projector with all peripheral equipment before turningon the projector.InstallationNOTE ON THE POWER CORDAC power cord must meet the requirements of the country where you use the projector.Confirm the AC plug type with the chart below and proper AC power cord must be used.If the supplied AC power cord does not match your AC outlet, contact your sales dealer.Projector side AC Outlet sideTo POWER CORDCONNECTOR on yourprojector.GroundTo the AC Outlet.(10 V AC)For Continental EuropeFor the U S A and Canada For the U KTo the AC Outlet.(00–40 V AC)To the AC Outlet.(00–40 V AC)Connect the AC power cord (supplied) to theprojector.PNote:Unplug the AC power cord when the projector is not in use. Whenthe projector is connected to an outlet with AC power cord, it is instand-by mode and consumes a little electric power.CAUTIONThe AC outlet must be near this equipment and must be easilyaccessible.Connecting the AC Power CordGround
