9Computer InputPNote:• Display area (H/V) cannot be selected when 480i, 575i,480p, 575p, 720p, 1035i , 1080i or 1080p is selected in the PCSystem Menu (p.36).• When input computer signal to the projector, PC adjust functionwill become available.Mode 1Mode 2Mode 3Mode 4Mode 5Mode 6Mode 7Mode 8Mode 9Mode 1000Total dots 1344Position H 255Position V 34Display area H 1024Display area V 768Where to free?store?StoreTotal dotsPosition HPosition VDisplay area HDisplay area V00Mode 1Mode 2Mode 3Mode 4Mode 5Mode 6Mode 7Mode 8Mode 9Mode 10Free00Total dots 1344Position H 255Position V 34Display area H 1024Display area V 768Where to store?VacantThis mode has storedparameters.Values of Total dots, Position H,Position V, Display area H andDisplay area V.Press the SELECT button tostore the data.Press the MENU buttonto close this dialog box.Mode freeStoreTo store the adjusted data, select Store and then press the Point uor the SELECT button. Move the highlight to one of the Modes 1 to10 in which you want to store, and then press the SELECT button.To clear the stored data, select Mode free and then press the Pointu or the SELECT button. Move the highlight to the Mode that youwant to clear and then press the SELECT button.To reset the adjusted data, select Reset and press the SELECTbutton. A confirmation box appears and then select yes. Alladjustments will return to their previous figures.ResetMode freeStorePress the SELECTbutton to clear thestored data.