Sanyo PLC-WM4500L Owner's Manual

Also see for PLC-WM4500: Owner's manual User manual Owner's manual Manual Manual

Contents

45If the projector cannot reproduce proper video image, select aspecific broadcast signal format from among PAL, SECAM, NTSC,NTSC 4 4, PAL-M, and PAL-N.The projector automatically detects an incoming video signal, andadjusts itself to optimize its performance.When the Video System is 105i, 100i or 100p, select thesystem manually.If the projector cannot reproduce proper video image, select aspecific component video signal format from among 40i, 575i,40p, 575p, 70p, 105i, 100i and 100p.Video jack or S-video jackThe projector automatically detects an incoming video system, andadjusts itself to optimize its performance.When Video System is PAL-M or PAL-N, select the systemmanually.Video Input1 AV System Menu (Video or S-video)AV System Menu (y, Pb/Cb, Pr/Cr)Press the MENU button to display the On-Screen Menu. Usethe Point pq buttons to select Input and then press the Pointu or the SELECT button.Use the Point pq buttons to select Video, S-video or Computer1(Component) and then press the SELECT button. Use the Point pq buttons to select System and then pressthe Point u or the SELECT button. Use the Point pq buttonsto select the desired system and then press the SELECTbutton.PNote:The AV System Menu cannot be selected when selectingRGB (Scart).Video System SelectionAutoy, Pb/Cb, Pr/Cr jacksAutoy, Pb/Cb, Pr/Cr SIGNAL FORMATPAL/SECAM/NTSC/NTSC4 4/PAL-M/PAL-N