Sanyo PLC-WM4500L Owner's Manual

Also see for PLC-WM4500: Owner's manual User manual Owner's manual Manual Manual

Contents

7Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Position H and Position V positions toconform to your computer.To store the adjusted parametersThe adjusted parameters from the Auto PC Adjustment can bestored in the projector. Once the parameters are stored, the settingcan be done just by selecting Mode in PC SYSTEM Menu (p.36).See “Manual PC Adjustment” on pages 38-39.PNote:• Fine sync, Total dots, Position H and Position V of certain computerscannot be fully adjusted with the Auto PC Adjustment function.When the image is not provided properly with this operation, manualadjustments are required. (pp.38-39)• The Auto PC adjustment cannot be operated when 480i, 575i, 480p,575p, 720p, 1035i, 1080i or 1080p is selected in the PC System Menu(p.36), or when the signal is coming from the HDMI terminal.• Depending on the condition of signals and the type and length ofcables, the signals may not be properly viewed.The Auto PC adjustment function can be operated directly bypressing the AUTO PC button on the remote control.AUTO PC buttonRemote ControlComputer InputPC adjust MenuPress the MENU button to display the On-Screen Menu. Usethe Point pq buttons to select PC adjust and then press thePoint u or the SELECT button.1 Use the Point pq buttons to select Auto PC adj and thenpress the SELECT button.Auto PC adj.Fine syncTotal dots 1366Position H 0Position V 0Current modeClamp 0Display area H 1024Display area V 768ResetMode freeStore0Use the Point pq buttons to select Auto PCadj and press the SELECT button.Please wait appears while the Auto PCadjustment is in process.Auto PC AdjustmentDirect OperationMenu OperationAuto PC adj