Sanyo PLC-WM4500L Owner's Manual

Also see for PLC-WM4500: Owner's manual User manual Owner's manual Manual Manual

Contents

Some computers employ special signal formats which may not be tuned by Multi-Scan system of this projector. Manual PCAdjustment enables you to precisely adjust several parameters to match those special signal formats. The projector has10 independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specificcomputer.Use the Point t u buttons to adjust the value, eliminating a flickerfrom the image displayed (from 0 to 31).Use the Point t u buttons to adjust the number of total dots in onehorizontal period to match your PC image.Use the Point t u buttons to adjust the horizontal picture position.Use the Point t u buttons to adjust the vertical picture position.Press the SELECT button to show H-sync freq. and V-sync freq. ofthe connected computer.Use the Point t u buttons to adjust the clamp level. When theimage has dark bars, try this adjustment.Use the Point t u buttons to adjust the horizontal area displayedby this projector.Use the Point t u buttons to adjusts the vertical area displayed bythis projector.Computer InputPC adjust Menu1Press the MENU button to display the On-Screen Menu. Usethe Point pq buttons to select PC adjust and then press thePoint u or the SELECT button.Use the Point pq buttons to select the desired item and thenpress the SELECT button to display theadjustment dialog box. Use the Point t u buttons to adjust thesetting value.Auto PC adj.Fine syncTotal dots 1366Position H 0Position V 0Current modeClamp 0Display area H 1024Display area V 768ResetMode freeStore0Fine syncTotal dotsPosition HPosition VCurrent modeClampDisplay area HDisplay area VManual PC Adjustment