Sanyo PLC-XF47 Service Manual

Also see for PLC-XF47: Brochure Specifications Owner's manual Owner's manual

Contents

Optical adjustment- 79 -AdjustmentToolScrew-BLCD Panel BracketPart-AScrew-ALCD PanelBracket hole■ CONVERGENCE ADJUSTMENT TOOL INSTALLATION AND REMOVALNote; Before mounting the Adjustment Tool, set adjustment screws of Adjustment Tool in center of the adjustment range.Refer to Screw Setting.1. Loosen 2screws-A of Prism/LCD panel unit.CAUTION: When loosening the screws-A, do not touch the other mechanical part or give it shock.2. Fully loosen 2screws-B on the Adjustment Tool.3. Fully slide the Adjustment Tool part-A into the LCD Panel Bracket hole.4. Mount Adjustment Tool on the Prism/LCD panel unit with screws-C attached with Adjustment Tool along the guide ontop of Prism Ass'y.CAUTION: Do not use other kind of screws for mounting, otherwise Prism/LCD panel unit may be damaged.5. Tighten screws-B and hold the LCD Panel Bracket.Screw-BScrew-CAdjustment ToolLoosen 2 Screws-B before installation.LCD Panel bracketPrism/LCD PanelunitTighten 2 Screws-B andhold the LCD Panel bracketTighten 2 Screws-C andhold the Prism/LCD PanelunitSlide theAdjustment Tool.Insert Adjustment Tool Leg (2 Legs) intoLCD Panel Bracket holes, and tightenscrews-B and hold LCD Panel Bracketwith Adjustment Tool.Step 2 Step 3 Step 4Prism/LCD Panel unit