Sanyo PLC-XF47 Service Manual

Also see for PLC-XF47: Brochure Specifications Owner's manual Owner's manual

Contents

■ Security Function NoticeThis projector provides security functions such as "Key lock", "PIN code lock" and "Logo PIN code lock". When the projector hasset these security function on, you are required to enter correct PIN code to use the projector. If you do not know the correctPIN code to the projector, the projector can no longer be operated or started. In this case, you must reset those function firstaccording to the resetting procedure described below and then check up on the projector.Function descriptionKey lockLocks operation of the side control or the remote control.If the Key lock is enabled with side control lock, the projector can no longerstated.Initial setting : Key lock function is disabledPIN code lock Prevents the projector from being operated by an unauthorized person.Initial code : "1234"Logo PIN code lockPrevents an unauthorized person for changing the start up logo on thescreen.Initial code : "4321"Resetting procedure1. Turn off the projector. (AC switch off.)2. As pressing the "SELECt" button on the projector, turn on the projector again. (AC switch on.)Keep pressing the "SELECt" button until the "REAdY" indicator lights continuously.This is complete the resetting of the security function. The PIN code lock and Logo PIN code lock are reset as the initialPIN code at the factory and Key lock function is disabled.Please refer to the owner's manual for further information of the security functions.- 9 -