PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications28/798.6 Input Control Command8.6.1 CF_INPUT CommandCommand “CF_INPUT_%1” [CR]%1“1”------------------------- Select Input 1 (not switching Source)“2”------------------------- Select Input 2 (not switching Source)“3”------------------------- Select Input 3 (not switching Source)“4”------------------------- Select Input 4 (Network viewer)“UP”---------------------- Increment Input No. by 1Input1→Input2→Input3→Input4→Input1→ - - -Input1→Input2→Input3→Input1→ - - -“DN”---------------------- Decrement Input No. by 1Input1→Input2→Input3→Input4→Input1→ - - -Input1→Input2→Input3→Input1→ - - -DetailsSelect Input (Available only in the normal Power ON status)This command switches only Input No, not Source. For instance, when Input 1has been selected, receiving the command to select Input 1 does not invokesource-switching operation. That means it operates differently from “INPUT”button of Projector or Remote Control.*When selecting Input4 on a projector with PJ-Net unattached, it comes to “103”.*When selecting Input4on a projector with PJ-Net attached and power OFF, Itcomes to “101”.Acceptable “000” [CR]ResponseUnacceptable “Error Code” [CR]8.6.2 CF_SOURCE CommandCommand “CF_SOURCE_%1” [CR]Input 1“DIGITAL” -------------- Select RGB (PC Digital) Input“ANALOG” ------------- Select RGB (PC Analog) Input“SCART” --------------- Select RGB (Scart) input“HDCP” ----------------- Select RGB (AV HDCP) input“UP” -------------------- Select in PC Analog → Scart → PC Digital →AV HDCP → PC Analog order“DN” ---------------------- Select in PC Analog → AV HDCP → PCDigital → Scart → PC Analog orderInput 2“VIDEO” ----------------- Select Video input“YPBPR”----------------- Select Y,Pb/Cb,Pr/Cr input“ANALOG” -------------- Select RGB input“UP” ---------- Select in VIDEO → YPBPR → RGB → VIDEO order“DN” ---------- Select in VIDEO → RGB → YPBPR → VIDEO orderInput 3“VIDEO” ---------------Select Video input“S-VIDEO” -------------- Select S-Video input“YPBPR” --------------- Select Y,Pb/Cb,Pr/Cr input“UP” ------- Select in VIDEO → YPBPR → S-VIDEO → VIDEO order“DN” ------ Select in VIDEO → S-VIDEO → YPBPR → VIDEO order%1Input 4“NETWORK”, “UP”, “DN”*Input can not be selected, but above parameter is processed asAcceptable.DetailsSelect Source of currently selected Input (Available only in the normal Power ONstatus)When selected input does not include specified %1, error code “101” is returned andit is not executed.When Input No is 4 and PJ-Net power is OFF, error code “101” is returned.Acceptable “000” [CR]ResponseUnacceptable “Error Code” [CR]
