Sanyo PLC-XM100/L - 5000 Lumens Manual

Also see for PLC-XM100: Specification sheet Specifications Specifications Network manual Manual

Contents

PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications38/798.9 Sound Command8.9.1 CF_VOLUME CommandCommand “CF_VOLUME_%1” [CR]%1“000-063” --------------------------- Directly specify value of Volume.“UP” --------------------------------- Increment setting value of Volume by 1“DN” --------------------------------- Decrement setting value of Volume by 1DetailsControl level of Volume (Available only in the normal Power ON status)Set Volume Up/Down the same way as RC and also directly specify value ofVolume. When setting Volume value, the Sound Mute ON status is canceledjust like RC operation. The value set by this command is stored in Projector’smemory.* When input signal is Network, error code “101” is returned.Acceptable “000” [CR]ResponseUnacceptable “Error Code” [CR]8.9.2 CF_MUTE CommandCommand “CF_MUTE_%1” [CR]%1 “ON” ----------------------------- Set Sound Mute to ON“OFF” --------------------------- Set Sound Mute to OFFDetails Control ON/OFF of Sound Mute (Available only in the normal Power ON status)* When input signal is Network, error code “101” is returned.Acceptable “000” [CR]ResponseUnacceptable “Error Code” [CR]8.9.3 CF_BLTINSP CommandCommand “CF_BLTINSP_%1” [CR]%1 “ON” ----------------------------- Set Built-in speaker to ON“OFF” --------------------------- Set Built-in speaker to OFFDetailsControl ON/OFF of Built-in speaker(Available only in the normal Power ON status)* When input signal is Network, error code “101” is returned.Acceptable “000” [CR]ResponseUnacceptable “Error Code” [CR]