Sanyo PLC-XM100/L - 5000 Lumens Manual

Also see for PLC-XM100: Specification sheet Specifications Specifications Network manual Manual

Contents

PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications46/798.10.24 CF_PJPINCODE CommandCommand “CF_PJPINCODE_%1” [CR]%1 “0000 – 9999” ------------- Directly specify PJ PIN codeDetailsEnter PIN code to cancel PIN code lock (Available only in the normal Power ONstatus)PIN code can not be changed. (Only PIN code lock is canceled.)*When PIN code Lock is enabled:PIN code is matched ------------------------- Command is valid (Acceptable)PIN code is mismatched -------------------- Command is invalid (Error code “102”)PIN code is beyond %1 available range ---- Command is invalid (Error code “?”)*When PIN code lock is canceled:PIN code is within %1 range ----------- Command is valid (Acceptable)PIN code is out of %1 range ----------- Command is invalid (Error code is 102)This command is only valid when “PJ PIN code” dialog is displayed to enter PINcode after Power is ON and Countdown is completed.When PIN code lock is set to “On1”, it needs to send this command every timethe projector is turned on.Acceptable “000” [CR]ResponseUnacceptable “Error Code” [CR]8.10.25 CF_SHUTRCPROT CommandCommand “CF_SHUTRCPROT_%1” [CR]%1 “ON” ------------------ Disable RC key from controlling Shutter (Protection On)“OFF” ----------------- Enable RC key to control Shutter (Protection Off)Details Set valid / invalid of RC use on Shutter control function(Valid only when in the normal Power ON status)Acceptable “000” [CR]ResponseUnacceptable “Error Code” [CR]8.10.26 CF_SHUTKEYPROT CommandCommand “CF_SHUTKEYPROT_%1” [CR]%1 “ON” --------- Disable key on the top panel from controlling Shutter (Protection On)“OFF” -------- Enable key on the top panel to control Shutter (Protection Off)Details Set valid / invalid use of key on the top panel on Shutter control function.(Valid only when in the normal Power ON status)Acceptable “000” [CR]ResponseUnacceptable “Error Code” [CR]