Sanyo PLC-XM100 Owner's Manual

Also see for PLC-XM100: Specification sheet Specifications Specifications Network manual Manual

Contents

17InstallationFor projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the screen.Note:• The brightness in the room has a great influence on picture quality. It is recommended to limit ambientlighting in order to obtain the best image.• All measurements are approximate and may vary from the actual sizes.100”33.1’(10.11 m)22.0’ (6.73 m)16.5’ (5.03 m)10.9’ (3.34 m)150”200”300”177”118”89”59”40”Max. ZoomMin. ZoomScreen Size(W x H) mm4:3 aspect ratioZoom (min.)40”Zoom (max.)610 x 4574.3'(1.30 m)7.4'(2.26 m)100”2032 x 152410.9’ (3.34 m)18.7' (5.71 m)150”3048 x 228616.5’ (5.03 m)28.2' (8.59 m)200”4064 x 304822.1’ (6.73 m)37.6' (11.47 m)300”6096 x 457233.1’(10.11 m)56.5' (17.23 m)(Inch Diagonal)(Center)56.5' (17.23 m)300”4.3'(1.30 m)Positioning the Projector50%10%Lens shift center position Shift rangeLens Shift AdjustmentProjection lens can be moved from side to side and up and down with the motor-driven lens shift function. This functionmakes the positioning of images easy on the screen. (See page 27)The display positioncan be shifted upwardup to 50% elevation ofthe display.The display position canbe shifted downward upto 50% low level of thedisplay.The display position canbe shifted to the left inup to 10% width of thedisplay.The display position canbe shifted to the right inup to 10% width of thedisplay.When the lens is shifted to top. When the lens is shifted to bottom.When the lens is shifted to leftmost. When the lens is shifted to rightmost.Lens shift adjustable rangeDownloaded From projector-manual.com Sanyo Manuals