0RGB Scart21-pin OutputS-videocableS-videoOutputCompositeVideoY - Pb/Cb - Pr/CrBNCcableUnplug the power cords ofboth the projector and externalequipment from the AC outletbefore connecting cables.Cables used for connection ( = Cables not supplied with this projector.)• Video cable (RCA x 1 or RCA x 3) • BNC cable (BNC x 1 or BNC x 3) • S-video cable • Scart-VGA cable • DVI-Digital cable ComponentVideo OutputCompositeVideoComponentVideo Output(Y, Pb/Cb, Cr/Pr)Digital Output(HDCPcompatible)RCAcable DVI-DigitalcableScart-VGAcableVideo DIGITAL INANALOG INANALOG OUT S-VIDEOInstallationInput Terminal Monitor Out CableInput 1D-sub15 RGB (PC analog) YESRGB (SCART) NODVI-D RGB (PC digital) NORGB (AV HDCP) NOInput 2 5 BNCRGB YESVideo YES Y, Pb/Cb, Pr/Cr YES Input 3RCA Y, Pb/Cb, Pr/Cr YES S-video S-video NOVideo Video YES Network NOAnalog Out Signal TableRefer to theAnalog OutSignal Table(above). A cable with oneend D-sub 15 andthe other end (Blackbox) compatible witheach equipment isnecessary.Video Y - Pb/Cb - Pr/CrConnecting to Video Equipment (Video, S-video)Downloaded From projector-manual.com Sanyo Manuals
