Sanyo PLC-XM100 Owner's Manual

Also see for PLC-XM100: Specification sheet Specifications Specifications Network manual Manual

Contents

4INPUT MENUWhen your computer is connected to INPUT 1 (DIGITAL)terminal, select RGB(PC digital).When your computer is connected to the INPUT 1 (ANALOG)terminal, select RGB (PC analog).RGB(PC digital)RGB(PC analog)Note:• Input source changes if the INPUT 1 button on the remote control ispressed.• HDCP (High-bandwidth Digital Content Protection) is a system forprotecting digital entertainment content which is delivered by DVI(Digital Visual Interface) from being copied. The specification of HDCPis decided and controlled by Digital Content Protection, LLC. Shouldthe specification be changed, this projector may not display the digitalcontent protected by HDCP.When connecting the computer output [5 BNC Type (Green, Blue,Red, Horiz. Sync, and Vert. Sync.)] from the computer to G, B, R,H/HV, and V jacks:Input SelectionWhen your computer is connected to the INPUT 2 (5 BNCINPUT JACKS) terminal, select RGB.RGB1Input 1 RGB(PC analog)Input 2 RGBInput 3 VideoSystem AutoInput 1 RGB(PC analog)Input 2 RGBInput 3 VideoSystem SVGA 1Press the MENU button to display the On-Screen Menu. Usethe Point ▲▼ buttons to select Input and then press thePoint ► or the SELECT button.Use the Point ▲▼ buttons to select the desired input andthen press the Point ► button to access the submenu items.Use the Point ▲▼ buttons to select the desired source andthen press the SELECT button.Input 1RGB(PC analog)RGB(Scart)RGB(PC digital)RGB(AV HDCP)Y,Pb/Cb,Pr/CrINPUT MENUINPUT 1 MENUComputer Input Source SelectionWHEN SELECTING INPUT 1 (COMPUTER INPUTTERMINALS )WHEN SELECTING INPUT (5 BNC INPUT jACKS )Menu OperationDownloaded From projector-manual.com Sanyo Manuals