0Press the FREEZE button on the remote control to freeze thepicture on the screen. To cancel the FREEZE function, press theFREEZE button again or press any other button.Fig.1 will appear when the Freeze function is working.FREEZE buttonFILTER buttonPress and hold the FILTER button for more than five seconds tooperate electrically operated filter to replace the filter.Remote ControlPOINTER buttonFILTER buttonNote:See the previous page for the description ofother buttons.MOUSEPOINTER buttonBasic OperationNote:• The filter cannot be rewound.• When the filter is replaced, the total accumulated time of the filter use isautomatically set to 0.FREEZE buttonP-TIMER buttonMove the pointer on the screen with this button.MOUSE POINTER buttonPOINTER buttonPress POINTER button on the remote control to display the Pointeron the screen.Press the P-TIMER button on the remote control to operate theCount up/Count down function. Refer to p.58 for detail of Setting forthe P-timer function.To stop the count time, press the P-TIMER button.To cancel the P-timer function, press and hold the P-TIMER button.P-TIMER buttonFig.1Downloaded From projector-manual.com Sanyo Manuals
