Sanyo PLC-XM100 Owner's Manual

Also see for PLC-XM100: Specification sheet Specifications Specifications Network manual Manual

Contents

7The command is sent from PC to the projector with theformat below;'C' [Command] 'CR'Command: two characters (refer to the commandtable below.-The projector decodes the command and returns the 'ACK'with the format below;'ACK' 'CR'-When the projector can not decode the command, it returnswith format below.‘?’ ‘CR’FormatAppendixCommand FunctionC00 Turn the projector ONC01 Turn the projector OFF(immediately OFF)C02 Turn the projector OFFC05 Select Input 1C06 Select Input 2C07 Select Input 3C08 Select NetworkC09 Volume +C0A Volume -C0B Sound mute ONC0C Sound mute OFFC0D Video mute ONC0E Video mute OFFC0F Aspect 4:3C10 Aspect 16:9C1C Menu ONC1D Menu OFFC20 Brightness UPC21 Brightness DOWNC23 Select Input 2 VideoC24 Select Input 2 Y, Pb/Cb,Pr/CrC25 Select Input 2 RGBC28 ON Start ONC29 ON Start OFFC33 Select Input 3 VideoC34 Select Input 3 S-videoC35 Select Input 3 Y, Pb/Cb,Pr/CrCommand FunctionC3A Pointer RIGHTC3B Pointer LEFTC3C Pointer UPC3D Pointer DOWNC3F EnterC46 Zoom DOWNC47 Zoom UPC4A Focus DOWNC4B Focus UPC50 Select Input 1 Analog RGBC51 Select Input 1 SCARTC52 Select Input 1 DVI (PC Digital)C53 Select Input 1 DVI (AV HDCP)C5D Lens shift UPC5E Lens shift DOWNC5F Lens shift LEFTC60 Lens shift RIGHTC89 Auto PC adj.C8E Keystone UPC8F Keystone DOWNC90 Keystone RIGHTC91 Keystone LEFTFunctional Execution CommandDownloaded From projector-manual.com Sanyo Manuals

/ 89

Related manuals for Sanyo PLC-XM100