Sanyo PLC-XM100 Owner's Manual

Also see for PLC-XM100: Specification sheet Specifications Specifications Network manual Manual

Contents

54SettingEnter a Logo PIN codeUse the Point ▲▼ buttons to enter a number. Press the Point ►button to fix the number and move the red frame pointer to the nextbox. The number changes to . If you fixed an incorrect number,use the Point ◄ button to move the pointer to the number you wantto correct, and then enter the correct number.Repeat this step to complete entering a four-digit number.After entering the four-digit number, move the pointer to Set. Pressthe SELECT button so that you can start to operate the projector.If you entered an incorrect Logo PIN code, Logo PIN code andthe number () will turn red for a moment. Enter the correctLogo PIN code all over again.Logo PIN code can be changed to your desired four-digit number.Press the Point ▼ button to select Logo PIN code change andthen press the SELECT button. The New Logo PIN code inputdialog box appears. Set a new Logo PIN code.Be sure to note the new Logo PIN code and keep it on hand. If youlost the number, you could no longer change the Logo PIN codesetting. For details on PIN code setting, refer to "PIN code lock" onpages 59-60.Use the Point ▲▼ buttons to switch On or Off, and then press theSELECT button to close the dialog box.Change the Logo PIN code lock settingEnter a Logo PIN codeAfter a correct Logo PIN codeis entered, the following dialogbox appears.CAUTION:WHEN yOU HAVE CHANGED THE LOGO PIN CODE, WRITEDOWN THE NEW PIN CODE IN COLUMN OF THE LOGO PINCODE NO MEMO ON PAGE 4, AND KEEP IT SECURELySHOULD THE LOGO PIN CODE BE LOST OR FORGOTTEN, THELOGO PIN CODE SETTING CAN NO LONGER BE CHANGEDChange the Logo PIN code lock settingOffLogo selectLogo PIN code changeChange the Logo PIN codeNextLogo selectDownloaded From projector-manual.com Sanyo Manuals