Sanyo PLC-XU116 - 4500 Lumens Manual

Also see for PLC-XU116: Dimensional drawing Specification sheet Manual Brochure Command list

Contents

PLC-XU116 Expand Serial Command Functional Specifications50/729.4.11 CR_NZRED CommandCommand “CR_NZRED”[CR]Details Get setting status of Noise ReductionResponseAcceptable “000_%1”[CR]%1“L1” -------- Noise Reduction for moving image“L2” -------- Noise Reduction for still image“OFF” ----- Noise Reduction is OFFUnacceptable “Error Code”[CR]9.4.12 CR_PROGV CommandCommand “CR_PROGV”[CR]Details Get setting status of Progressive scanResponseAcceptable “000_%a”[CR]%a“L1” ----------------- Progressive Mode L1 is selected“L2” ----------------- Progressive Mode L2 is selected“FILM” -------------- Progressive Model FILM is selected“OFF” --------------- Progressive scan is disabledUnacceptable “Error Code”[CR]9.4.13 CR_IMAGE CommandCommand “CR_IMAGE”[CR]DetailsGet image setting statusRequired data “CUSTOM1” to “CUSTOM4” is the same as “Image1” to “Image4”displayed when selecting IMAGE on OSD menuResponseAcceptable “000_%a”[CR]%a“DYNAMIC” --------------------------------------- Dynamic“STAND” ------------------------------------------- Standard“REAL” --------------------------------------------- Real“CINEMA” ----------------------------------------- Cinema“BLACKBOARD” -------------------------------- Blackboard“COLORBOARD” -------------------------------- Colorboard“CUSTOM1”~”CUSTOM4” -------------------- Image1~4Unacceptable“Error Code”[CR] ---- When the command is invalid due tocondition such as Input source“?”[CR] -------------------- When unclear command is received9.4.14 CR_IMGGMD CommandCommand "CR_IMGGMD”[CR]Details Get Image Gamma setting statusResponseAcceptable “000_%a”[CR]%a“DYN” ------------ Dynamic“STD” ------------ Standard“REL” ------------ Real“CNM” ----------- Cinema“BKB” ------------ Blackboard“CLB” ------------ ColorboardUnacceptable “Error Code”[CR]