Sanyo PLC-XU4000 Owner's Manual

Also see for PLC-XU4000: Specification sheet Owner's manual Manual Manual Dimensional drawing

Contents

23Rotate the Zoom Ring to zoom in and out.Rotate the Focus Ring to adjust the focus of the image.Zoom and Focus AdjustmentIf a projected picture still has keystone distortion afterpressing the AUTO SETUP button on the top control or theAUTO SET button on the remote control, correct the imagemanually as follows:Press the KEYSTONE button on the remote control. TheKeystone dialog box appears. Use the Point ▲▼ buttons tocorrect keystone distortion. The keystone adjustment can bestored (see pages 37, 45).Reduce the upper widthwith the Point ▲ button.Reduce the lower widthwith the Point ▼ button.• The white arrows indicate that there is nocorrection.• A red arrow indicates the direction of correction.• An arrow disappears at the maximum correction.• If you press the KEYSTONE button on theremote control once more while the keystonedialog box is being displayed, the keystoneadjustment will be canceled.• The adjustable range is limited depending on theinput signal.Keystone CorrectionRemote ControlAuto setup function is provided to automatically execute the setting of Auto setup (includes Input search, AutoPC adj. and Auto Keystone functions) in the setting menu by just pressing the AUTO SETUP button on thetop control or the AUTO SET button on the remote control. Refer to page 47 for the setting of the Auto setupfunction.Notes:• Auto Keystone corrects vertical distortion only; it doesnot correct horizontal distortion.• Auto Keystone cannot work when Ceiling feature is setto On in the Screen Size Adjustment menu (pp.37, 45).• Perfect correction of the image distortion cannot beensured with the Auto setup function. If the distortioncannot be corrected properly by pressing the AUTOSETUP or AUTO SET button, adjust manually bypressing the KEYSTONE button on the remote controlor selecting Keystone in the Screen Size Adjustmentmenu (pp.37, 45).• Fine sync, Total dots, Horizontal and Vertical positionof some computers cannot be fully adjusted withthe Auto PC Adjustment function. When the imageis not provided properly with this operation, manualadjustments are required (pp.31-32).AUTO SET buttonAuto Setup FunctionPOINT ▲▼ buttonsKEySTONE buttonZoom RingFocus RingTop ControlAUTO SETUP buttonPOINT▲▼ buttonsBasic OperationDownloaded From projector-manual.com Sanyo Manuals