Sanyo PLC-XU4000 Owner's Manual

Also see for PLC-XU4000: Specification sheet Owner's manual Manual Manual Dimensional drawing

Contents

35This projector has the picture screen resize function, whichenables you to customize the image size.Screen MenuScreen Size AdjustmentProvide the image to fit the screen size.NormalFullProvide the full screen image. Note:• This projector cannot display any resolution higher than 1920 x 1200. If your computer’s screen resolution ishigher than it, reset the resolution lower before connecting to the projector.• The image data in other than 1024 x 768 is modified to fit the screen size in initial mode.• True and Digital zoom +/– cannot be selected when 480i, 575i, 480p, 575p, 720p, 1035i or 1080i isselected in the PC System Menu (p.29).12Press the MENU button to display the On-ScreenMenu. Use the Point ▲▼ buttons to select Screen andthen press the Point ► or the SELECT button.Use the Point ▲▼ buttons to select the desired itemand then press the SELECT button .Computer Inputwide (16:9)Provide the image at the 16:9 wide screen ratio.ZoomScale the image proportionally to fit the entire screen. Eitherside of image may go over the screen.CustomProvide the last stored aspect screen image.StoreTo store the adjusted data, select Store and press the Point► button or the SELECT button. Use the Point ▲▼ buttonsto select one from Image 1 to 4 and press the SELECTbutton.A confirmation box appears and then select yes. Storeddata can be called up by selecting an Image (1–4) in theImage Mode Selection on page 33.A confirmation boxappears and thenselect yesTrueProvide the image in its original size. When the originalimage size is larger than the screen size (1024 x 768), theprojector enters to the panning mode automatically. Use thePoint ▲▼◄► buttons to pan the image. When adjusted,the arrows will turn red. When reached to the correctionlimits, the arrows will disappear.Downloaded From projector-manual.com Sanyo Manuals