Sanyo PLC-XU4000 Owner's Manual

Also see for PLC-XU4000: Specification sheet Owner's manual Manual Manual Dimensional drawing

Contents

40Video System Selection1 AV System Menu (Video or S-video)AV System Menu (Component)2If the projector cannot reproduce proper video image,select a specific broadcast signal format from among PAL,SECAM, NTSC, NTSC 4 43, PAL-M, and PAL-N.PAL/SECAM/NTSC/NTSC4 43/PAL-M/PAL-NThe projector automatically detects an incoming videosignal, and adjusts itself to optimize its performance.If the projector cannot reproduce proper video image, selecta specific component video signal format from among 480i,575i, 480p, 575p, 720p, 1035i and 1080i.AutoCOMPONENT VIDEO SIGNAL FORMATVideo or S-videoComponentThe projector automatically detects an incoming videosystem, and adjusts itself to optimize its performance.When Video System is PAL-M or PAL-N, select the systemmanually.Auto Note:The AV System Menu cannot be selected when selectingRGB (Scart).Press the MENU button to display the On-ScreenMenu. Use the Point ▲▼ buttons to select Input andthen press the Point ► or the SELECT button.Use the Point ▲▼ buttons to select Video, S-videoor Computer 1(Component) and then press theSELECT button.3 Use the Point ▲▼ buttons to select System and thenpress the Point ► or SELECT button. Use the Point▲▼ buttons to select the desired system and thenpress the SELECT button.Video InputDownloaded From projector-manual.com Sanyo Manuals