Sanyo PLC-XU4000 Owner's Manual

Also see for PLC-XU4000: Specification sheet Owner's manual Manual Manual Dimensional drawing

Contents

5Safety InstructionsAll the safety and operating instructions should be readbefore the product is operated.Read all of the instructions mentioned here and retainthem for later use. Unplug this projector from AC powersupply before cleaning. Do not use liquid or aerosolcleaners. Use a damp cloth for cleaning.Follow all warnings and instructions marked on theprojector.For added protection to the projector during a lightningstorm, or when it is left unattended and unused for longperiods of time, unplug it from the wall outlet. This willprevent damage due to lightning and power line surges.Do not expose this unit to rain or use near water... forexample, in a wet basement, near a swimming pool, etc...Do not use attachments not recommended by themanufacturer as they may cause hazards.Do not place this projector on an unstable cart, stand,or table. The projector may fall, causing serious injuryto a child or adult, and serious damage to the projector.Use only with a cart or stand recommended by themanufacturer, or sold with the projector. Wall or shelfmounting should follow the manufacturer’s instructions,a n d s h o u l d u s e a m o u n t i n g k i t a p p r o v e d b y t h emanufacturers.An appliance and cart combinationshould be moved with care. Quickstops, excessive force, and unevensurfaces may cause the applianceand cart combination to overturn.Slots and openings in the back and bottom of the cabinetare provided for ventilation, to ensure reliable operation ofthe equipment and to protect it from overheating.The openings should never be covered with cloth or othermaterials, and the bottom opening should not be blockedby placing the projector on a bed, sofa, rug, or othersimilar surface. This projector should never be placednear or over a radiator or heat register.This projector should not be placed in a built-in installationsuch as a book case unless proper ventilation is provided.Never push objects of any kind into this projector throughcabinet slots as they may touch dangerous voltage pointsor short out parts that could result in a fire or electricshock. Never spill liquid of any kind on the projector.Do not install the projector near the ventilation duct ofair-conditioning equipment.This projector should be operated only from the typeof power source indicated on the marking label. If youare not sure of the type of power supplied, consult yourauthorized dealer or local power company.Do not overload wall outlets and extension cords as thiscan result in fire or electric shock. Do not allow anythingto rest on the power cord. Do not locate this projectorwhere the cord may be damaged by persons walking onit.Do not attempt to service this projector yourself asopening or removing Covers may expose you todangerous voltage or other hazards. Refer all servicingto qualified service personnel.Unplug this projector from wall outlet and refer servicingto qualified service personnel under the followingconditions:a. When the power cord or plug is damaged or frayed.b. If liquid has been spilled into the projector.c. If the projector has been exposed to rain or water.d. If the projector does not operate normally by followingthe operating instructions. Adjust only those controlsthat are covered by the operating instructions asimproper adjustment of other controls may result indamage and will often require extensive work by aqualified technician to restore the projector to normaloperation.e. If the projector has been dropped or the cabinet hasbeen damaged.f. When the projector exhibits a distinct change inperformance-this indicates a need for service.When replacement parts are required, be sure theservice technician has used replacement parts specifiedby the manufacturer that have the same characteristicsas the original part. Unauthorized substitutions mayresult in fire, electric shock, or injury to persons.Upon completion of any service or repairs to thisprojector, ask the service technician to perform routinesafety checks to determine that the projector is in safeoperating condition.NOTE FOR CUSTOMERS IN THE USHg LAMP(S) INSIDE THIS PRODUCT CONTAINMERCURY AND MUST BE RECYCLED OR DISPOSEDOF ACCORDING TO LOCAL, STATE OR FEDERALLAWS.Downloaded From projector-manual.com Sanyo Manuals