Sanyo PLC-XW50 Owner's Manual

Contents

Basic Operation4black out ➜ the captured image ➜ normal ➜ • • • • •Press the NO SHOW button on the remote control toblack out the image. To restore to normal, press theNO SHOW button again or press any other button.When a projected image is captured and set as "User"in the Logo selection (p.4), the screen changes eachtime you press the NO SHOW button as follows.NO SHOW buttonPress the AUTO PC button on the remote control tooperate the Auto PC function. For more detail, seepage 7.AUTO PC buttonPress the D.ZOOM buttons on the remote control tozoom in and zoom out the images. For more detail,see page 33.D ZOOM buttonsPress the P-TIMER button on the remote control. Thetimer display "00 : 00" appears on the screen and thetimer starts to count time (00 : 00 ~ 59 : 59).To stop the P-Timer, press the P-TIMER button. Pressthe P-TIMER button again, then the P-timer displaydisappears.P-TIMER buttonPress the IMAGE button on the remote control to selecta desired image level of the screen. For more detail,see pages 30 and 37.IMAGE buttonFor detail, see page .KEySTONE buttonLAMP CONTROL buttonPress the LAMP CONTROL button on the remotecontrol to select the lamp mode for changing thebrightness of the screen.Normal . . . normal brightnessAuto . . . . . brightness according with the inputsignalEco........... lower brightness reduces the lamppower consumption and extends thelamp life.Remote ControlD ZOOM buttonsNO SHOW buttonAUTO PC button✔ Note:See the previous page for theother buttons.KEySTONE button(See p.)POINT ed buttonsThe message disappears after 4 seconds.P-Timer displayLAMP CONTROLbuttonP-TIMER buttonIMAGE buttonVOLUME +/- buttons(See p.3.)