Sanyo PLC-XW50 Owner's Manual

Contents

Setting46Power managementF o r r e d u c i n g p o w e r c o n s u m p t i o n a s w e l l a smaintaining the lamp life, the Power managementfunction turns off the projection lamp when theprojector is not used for a certain period.When the input signal is interrupted and no button ispressed for more than 30 seconds, the timer displaywith "No signal" appears. The countdown starts to turnoff the lamp.Select one of the operations:Ready. . . . . . . . When the lamp has been fullycooled down, the POWER indicatorchanges to green blinking. Inthis condition, the projection lampis turned on if the input signal isreconnected or any button on thetop control or remote control ispressed.Shut down . . . . When the lamp has been fullycooled down, the power is turnedoff.Off . . . . . . . . . . Power management function is off.Then set the countdown timer with the Point 7 8buttons.Time left before Lamp is off.Press the SELECTbutton at Powermanagement and thisbox appears. Chooseone of three settingswith the Point 7 8buttons, and go to thetimer with the Pointed buttons and settime with the Point 7 8buttons.Power management