Sanyo PLC-XW50 Owner's Manual
                                                                  | |
Contents
|
Setting49To Enter the PIN codeSelect a number by pressing the Point ed buttons.And then press the Point 8 button to fix the numberand move the pointer. The number changes to "✳".If you fixed an incorrect number, move the pointerto the number you want to correct by pressing thePoint 7 button, and then select the correct numberby pressing the Point ed buttons.Repeat this step to complete entering a four-digitnumber.After entering the four-digit number, move thepointer to "Set" by pressing the Point 8 button.Press the SELECT button so that you can changethe following PIN code lock settings.If you entered an incorrect PIN code, "PIN code"and the number (✳✳✳✳) turns red. Enter a PINcode all over again.The PIN code can be changed to your desired four-digit number.Select "PIN code change" with the Point d button,and press the SELECT button to display the NewPIN code input dialog box.Select a number by pressing the Point ed buttons.And then press the Point 8 button to fix the numberand move the pointer. Repeat it to completeentering a four-digit number. After entering the four-digit number, move the pointer to "Set" by pressingthe Point 8 button. Then press the SELECT button.To Change the PIN codeCAUTION:WHEN yOU HAVE CHANGED THE PIN CODE,WRITE DOWN THE NEW PIN CODE IN COLUMNOF THE PIN CODE NO MEMO ON PAGE 65, ANDKEEP IT SECURELy IF yOU FORGET yOUR PINCODE, THE PROjECTOR CAN NO LONGER BESTARTEDSelect Off, On1, or On with the Point 7 8 buttonsand then move the red framed pointer to "Quit" withthe Point d button. Press the SELECT button toclose the dialog box.To Change the PIN code lock settingChange the PIN codeSelect PIN code change andpress the SELECT button.The New PIN code inputdialog box appears.The input numbers are beingdisplayed for confirmation.Change the PIN code lock settingSelect a desired setting withthe Point 7 8 buttons.Enter a PIN codeThe input numbers changeto "✳" for security.Move the pointer to "Set" by pressingthe Point 8 button. And then pressthe SELECT button.Setting |
Related manuals for Sanyo PLC-XW50
manualsdatabase
Your AI-powered manual search engine