Sanyo PLC-XW50 Owner's Manual
                                                                  | |
Contents
|
Computer Input8Press the MENU button to display the On-ScreenMenu. Press the Point 7 8 buttons to move thered framed pointer to the PC Adjust Menu icon.Press the Point ed buttons to move the redframed pointer to the item that you want to adjustand then press the SELECT button to displaythe adjustment dialog box. Press the Point 7 8buttons to adjust the value.Manual PC AdjustmentSome computers employ special signal formats which may not be tuned by Multi-scan systemof this projector. Manual PC Adjustment enables you to precisely adjust several parameters tomatch those signal formats. The projector has 5 independent memory areas to memorize thoseparameters manually adjusted. It allows you to recall the setting for a specific computer.12Press the Point 7 8 buttons to adjust the value toeliminate flicker from the image displayed. (From 0 to31.)Fine syncPress the Point 7 8 buttons to adjust the number oftotal dots in one horizontal period to match your PCimage.Total dotsPress the Point 7 8 buttons to adjust the horizontalpicture position.HorizontalPress the Point 7 8 buttons to adjust the verticalpicture position.VerticalPress the SELECT button to show H-sync freq. andV-sync freq. of the connected computer.Current modePress the Point 7 8 buttons to adjust clamp level.When the image has dark bars, try this adjustment.ClampMove the red framedpointer to an item and pressthe SELECT button.PC Adjust MenuPC Adjust Menu iconPress the SELECTbutton at this item toadjust other items.Press the Point 7 8buttons to adjust thevalue.Status (Stored/Free)of the selected Mode.Selected ModePress the SELECT buttonat the Current mode item toshow the information of theconnected computer. |
Related manuals for Sanyo PLC-XW50
manualsdatabase
Your AI-powered manual search engine