Sanyo PLC-XW50 Owner's Manual

Contents

Computer Input3StoreExit the Image Adjust Menu.QuitTo store the adjusted data, select Store and press theSELECT button. Select a level from Image 1 to 4 withthe Point ed buttons and press the SELECT button. Aconfirmation box appears and then select [Yes].Stored data can be called up by selecting "Image" inthe Image Level Selection on page 30.This projector has the picture screen resize function, which enables you to customize the imagesize.Press the MENU button to display the On-ScreenMenu. Press the Point 7 8 buttons to move thered framed pointer to the Screen Menu icon.Press the Point ed buttons and move the redframed pointer to the function that you want toselect and then press the SELECT button.2Screen Size AdjustmentProvide the image to fit the screen size.NormalTrueProvide the image in its original size. When the originalimage size is larger than the screen size (104 x 768 ),this projector enters panning mode automatically. Panthe image with Point ed 7 8 buttons. When adjusted,the arrows turns red. When reached to the correctionlimit, the arrows disappears.1WideProvide the image to fit wide video aspect ratio (16:9)by expanding the image width uniformly. This functioncan be used for providing a squeezed video signal at16:9.Full screenProvide the full screen image.Move the red framedpointer to any ofImage 1 to 4 whereyou want to setand then press theSELECT button.The confirmationbox appears,then select [Yes].Store itemPress the SELECTbutton at this item tostore the adjusted data.Move the red framed pointerto the function and press theSELECT button.Screen MenuScreen Menu icon✔ Note:• T h i s S c r e e n M e n u c a n n o t b eoperated when 70p(HDTV), 1035i(HDTV), or 1080i (HDTV) is selectedin the PC System Menu (p.6).• The projector cannot display anyresolution higher than 180x104.If your computer’s screen resolutionis higher than it, reset the resolutionto the lower before connecting to theprojector.• The image data in other than XGA(104x768) is modified to fit thescreen size in initial mode.• True, Full screen, and Digital zoom+/– cannot be selected when 480i,575i, 480p, or 575p is selected inthe PC System Menu (p.6).