Sanyo PLC-XW50 Owner's Manual

Contents

Setting43CaptureThis function enables you to capture the imagebeing projected and use it for a start-up display orinterval of presentations.After capturing the projected image, go to theLogo select function and set it to "User". Thenthe captured image is displayed when turning onthe projector next time or pressing the NO SHOWbutton. (p.4)To capture the image, select [Yes]. To cancel theCapture function, select [No].✔ Note:• Before capturing an image, select Standardin the Image Select Menu to capture a properimage. (p.30, 37.)• A signal from a computer can be capturedup to XGA (104x768). A signal from videoequipment can be captured except for 70p,1035i, and 1080i.• When capturing the image that has beena d j u s t e d b y t h e K e y s t o n e f u n c t i o n , t h eadjustment data is automatically reset and theprojector captures an image without keystoneadjustment.• When the Logo PIN code lock function is "On",Capture menu cannot be selected.• When starting to capture a new image, thepreviously stored image is cleared even if youcancel the capturing.Select [Yes] to capture theprojected image.Select [Yes] to stopcapturing.CaptureThis function prevents an unauthorized person fromchanging the screen logo.Off . . . . . . the screen logo can be changedfreely from the Logo select menu.(p.4)On . . . . . . the screen logo cannot be changedwithout the Logo PIN code.If you want to change the Logo PIN code locksetting, enter a Logo PIN code along the followingsteps. The initial Logo PIN code is set "431" at thefactory.Logo PIN code lock Logo PIN code lockSetting