– 12 –2. DISASSEMBLYNote:1. When disassembling and reassembling the main unit, the LCD and the battery cover, always be sure to use the airleak tester (VJ8-0303) to test for air leaks and to check that the waterproof mechanism is functioning normally.Refer to the Instruction Manual provided with the air leak test tool for details on how to carry out the air leak test.2. This camera uses waterproof packing. It is recommended that you replace the waterproof packing approximatelyonce every year. The waterproof packing is supplied in the COMPL, MENT KIT-SV-114 (P/No. 636 110 2131) shownin the table below. These parts can also be supplied as single parts.Summary of waterproof maintenance parts kitParts name: COMPL, MENT KIT-SV-114Parts code: 636 110 2131NO. DESCRIPTION123GASKET CABINET-SG114/J41NUMBER52SPACER MIC2-SG114/J1GASKET LCD-SG114/J6PAD BATTERY-SG114/J 1ADHESIVE COV BATT A-SG114 11ADHESIVE COV BATT B-SG1147 ADHESIVE COV BATT D-SG114 1CABINETLCDCOVERBATTERYPARTS NO.6361040174636107399863610401816361040198636104717363610471806361066044GASKET CABINET-SG114/J GASKET LCD-SG114/JPAD BATTERY-SG114/JADHESIVE COV BATT A-SG114SPACER MIC2-SG114/JADHESIVE COV BATT D-SG114ADHESIVE COV BATT B-SG114When doing an air leak test at theLCD, these parts must be replaced.(If these parts are not removed, itwill not be possible to do the air leaktest at the LCD.)SECTIONList of waterproof maintenance parts kit