Sanyo VPC-E1W Service Manual

Contents

– 19 –1. Shaft cover batt2. Spring cover batt3. Comp, cover batt4. Spacer holder joint5. Two screws 1.7 x 46. Screw 1.7 x 2.57. Two screws 1.7 x 3.58. Cover joint inner9. Two screws 1.7 x 3.510. Earth joint LCD11. Pull the LCD from the body.12. Holder LCD13. Screw 1.7 x 3.514. Holder joint base15. Two screws 1.7 x 2.516. Two screws 1.7 x 3.517. Two screws 1.7 x 4.518. Cover LCD back19. Spacer mic220. Dec LCD top21. Four screws 1.7 x 222. Earth LCD A23. Holder joint R24. Holder joint L25. Pull the assy jointfrom the LCD.26. Four screws 1.7 x 327. Cover LCD inner28. FPC29. FPC30. Four screws 1.7 x 2.531. FPC32. LCD33. Three screws 1.7 x 234. VF1 board35. Holder LCD36. Gasket LCD37. Cover LCD front38. Assy jointInstalling the ASSY JOINT (RUBBER)to the COVER LCD FRONT (step 28)Install so that the rubber will not come out.Installing the LCD to the CABI RIGHT (step 11)1. Insert the FPC of the LCD into theCABI RIGHT.2. Install the rubber of the ASSY JOINTto the cabinet.3. Install the LCD jointto the cabinet.4. After installing, close the LCD.When reassemblingThe air leak test shouldbe carried out betweensteps 20 and 21.