Sanyo VPC-E1W Service Manual

Contents

C2NOTES:1. All resistance values in "OHMS" unless otherwise noted.(K=1,000 ; M=1,000,000)2. All capacitance values in "μF" unless otherwise noted.p=pico farad ; μ ,u or U=micro farad3. All inductance values in "μH" unless otherwise noted.μ ,u or U=micro henry ; m=milli henryPRODUCT SAFETY NOTICETHE COMPONENTS DESIGNATED BY A SYMBOL ( ) IN THISSCHEMATIC DIAGRAM DESIGNATES COMPONENTS WHOSEVALUE ARE OF SPECIAL SIGNIFICANCE TO PRODUCT SAFETY.SHOULD ANY COMPONENT DESIGNATED BY A SYMBOL NEED TOBE REPLACED, USE ONLY THE PART DESIGNATED IN THE PARTSLIST.DO NOT DEVIATE FROM THE RESISTANCE, WATTAGE AND VOLT-AGE RATINGS SHOWN.EXPLANATORY NOTES (EXAMPLES)Resistor 10K:1/16J means 10kilo ohm ±5%, 1/16watt max.1M:1/10K means 1mega ohm ±10%, 1/10watt max.Capacitor 0.047:F means 0.047micro farad, Ftype.Electrolytic capacitor10:16 means 10micro farad, 16volt max.Inductor 330:J means 330micro henry ±5%470:K means 470micro henry ±10%No description J or K means ±5%Figure of printed wiring boardsMultilayer board:"Side A" means the view from A side of the board."Side B" means the view from B side of the board.Singlelayer board:View from the copper-foil side of the board, otherwise noted.PAL-F-EXThe number of "H=##" written in slant character, shows the voltage.The number of "H=##" written in upright character, shows the height of the parts.