TCL 43S435 Instructions Manual

Also see for 43S435: Manual

Product RegistrationPlease register your purchase on-line at www.TCLUSA.com. It will make it easier to contact you should it ever benecessary. Registration is not required for warranty coverage.Product InformationKeep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record theserial and model numbers in case you need them. These numbers are located on the product.Model No.____________________________________________Serial No._____________________________________________Purchase Date________________________________________Dealer/Address/Phone__________________________________Important safety instructions1. Read instructions. Read all the safety and operating instructions before operating the product.2. Retain instructions. Retain the safety and operating instructions for future reference.3. Heed warnings. Adhere to all warnings on the product and in the operating instructions.4. Follow instructions. Follow all operating and use instructions.5. Water and moisture. Do not use this product near water.6. Cleaning. Clean only with a dry cloth.7. Ventilation. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.8. Heat. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus(including amplifiers) that produce heat.9. Grounding or polarization. Do not defeat the safety purpose of the polarized or grounding-type plug. Apolarized plug has two blades with one wider than the other. A grounding type plug has two blades and athird grounding prong. The wide blade or the third prong are provided for your safety. If the provided plugdoes not fit into your outlet, consult an electrician for replacement of the obsolete outlet.10. Power cord protection. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,and the point where it exits from the product.11. Accessories. Use only attachments/accessories specified by the manufacturer.12. Stand/cart. Use only with the cart, stand, tripod, bracket, or table specified by themanufacturer, or sold with the apparatus. When a cart is used, use caution when moving thecart/apparatus combination to avoid injury from tip-over.13. Power. Unplug this apparatus during lightning storms or when unused for long periods oftime.14. Servicing. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has beendamaged in any way, such as power-supply cord or plug damaged, liquid has been spilled or objects havefallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, orhas been dropped.15. If an outside antenna or cable system is connected tothe product, be sure the antenna or cable system isgrounded so as to provide some protection againstvoltage surges and built-up static charges. Section 810of the National Electrical Code, ANSI/NFPA No. 70-2011(Section 54 of Canadian Electrical Code, Part 1)provides information with respect to proper groundingof the mast and supporting structure, grounding of thelead-in wire to an antenna-discharge unit, size ofgrounding conductors, location of antenna-dischargeunit, connection to grounding electrodes, andrequirements for the grounding electrode. Seefollowing example: