TCL 43S435 Instructions Manual

Also see for 43S435: Manual

128Enable 1-touch play1-touch play enables a device to control which TV input is active. For example,pressing Play on your Blu-ray™ player switches the TV to the Blu-ray™ input.1-touch play is disabled by default. To enable 1-touch play, in the Home screen menu,navigate to Settings > System > Control other devices (CEC) and highlight 1-touch play.Press OK to enable or disable the feature.Enable system standbyThe system standby feature causes other devices to power off when you power offyour TV. Depending on the CEC System Standby implementation, it also might enableconnected devices to power off your TV when you power off the device.System standby is disabled by default. To enable system standby, in the Home screenmenu, navigate to Settings > System > Control other devices (CEC) and highlight Systemstandby. Press OK to enable or disable the feature.Restarting the TVYou can restart the TV when necessary. Restarting has the same effect as unpluggingthe TV power and then plugging it in again.To restart the TV, navigate to Settings > System > Power, and then select System restart.Highlight Restart, and then press OK to confirm restart.While the TV restarts, the screen goes dark for a few seconds, and then displays thestartup screen for a few more seconds. When the restart operation completes, the TVdisplays the activity you selected in Power on settings.Resetting the TVYou can choose to reset only the TV picture and audio settings to their originalvalues, or perform a full factory reset to return the TV to the state it was in when youfirst unpacked and turned it on.