TCL 43S435 Instructions Manual

Also see for 43S435: Manual

130Models with a RESET button1. Using a straightened paper clip or ball-point pen, press and hold the recessedRESET button on the TV connector panel.2. Continue to hold the RESET button for approximately 12 seconds.When the reset cycle completes, the status indicator comes on dim.3. Release the RESET button. The TV is now powered off.4. Turn on the TV and proceed through Guided Setup. See Guided Setup.Models without a RESET button1. On the TV panel (not the remote) press and hold down the MUTE and POWERbuttons.2. Unplug the TV power, and then plug it in while continuing to hold down theMUTE and POWER buttons.3. When you see the startup screen appear on the TV, release the buttons.4. Turn on the TV and proceed through Guided Setup. See Guided Setup.Network connection resetIf you want to remove your network connection information without disturbing othersettings, navigate from the Home screen to Settings > System > Advanced systemssettings > Network connection reset, and then select Reset connection.When you select this option, the TV removes your wireless network information,including the name of the connection (its SSID) and your wireless password, if any,and then it restarts. After restarting, your TV retains all of its other settings and itsassociation with your Roku account.After resetting your network connection, navigate from the Home screen to Settings >Network > Set up new connection to continue enjoying all of the benefits of yourconnected TV.