TEC CB-416 Series Maintenance Manual

Contents

TEC CB-416 Series Maintenance Manual Manual pdf 12 page image

2-82. MAIN UNIT REPLACEMENT EO18-33002A2.6 REPLACING THE PS UNIT1) Disconnect the two cables from CN1 and CN2 on the PS unit.2) Remove the five SMW-4x8 screws to detach the PS unit. Detach the PS cover by moving it in thearrow-indicating direction.3) Remove the N-3 nut and D-3x6 screw to remove the thermistor from the PS unit.4) Replace the PS unit with a new one, and then reassemble in the reverse order of removal.2.6 REPLACING THE PS UNITWARNING!Replace only with the same type and rated fuse for continued protection against risk of fire.PS Cover Connector (CN2)PS UNITSMW-4x8 ScrewSMW-4x8 ScrewThermistorD-3x6 ScrewNut (N-3)SMW-4x8 ScrewConnecter (CN1)SMW-4x8 ScrewFig. 2-10