5-49EO18-33002A5. DIAG. TEST OPERATION5.4.2 Process Test PrintIn the process test print, the test print is automatically performed under the following conditions.• OPERATION : One label feed. Slant line print (4 colors), character print, colorbar print• ISSUE COUNT : 3 labels each• PRINT SPEED : 6 inches/sec.• SENSOR : Transmissive sensor (feed gap sensor) or reflective sensor(black mark sensor)• TYPE : Batch (without cut)• REVERSE FEED : Yes• ISSUE MODE : High quality print• LABEL LENGTH : 102 mmOperating procedure for the test mode is provided below.5.4 TEST PRINT MODEPower offPress the [FEED] key twice.Turn on the power whileholding down the [FEED]key and [PAUSE] key.< 1 D I A G . V 1 . O A>< 3 T E S T P R I N T>Press the [PAUSE] key.Press the [RESTART] key.After feeding one label, eachcolor's slant lines are printedon 3 labelsColor bars areprinted on 3 labels.Press the [RESTART]key.P R N T C O N D I T I O NIA U O P R I N T ( R E F L )TPress the [PAUSE] key.From onthe next page.CTo on thepreceding page.ATo be continued onof the next page.BTo of thepreceding page.CPress the [FEED] keyand [RESTART] keyat the same time.Color bars are printed on3 labels.
