5-21EO18-33002A5. DIAG. TEST OPERATIONPower offPress the [FEED] key.Turn on the power whileholding down the [FEED]key and [PAUSE] key.< 1 D I A G . V 1 . O A>< 2 P A R A M E T E R S E T>Press the [PAUSE] key.Press [PAUSE] key.P R N T C O N D I T I O NIPress [PAUSE] key.I S U E C O U N T 5SSet the number of labels tobe printed with the[FEED] or [PAUSE] key.Press the [PAUSE] key.Press the [FEED]and [RESTART] keysat the same time.Set the printcountSet the printspeedSet the sensortypeSet the mediaback feedingP R N T S P E E D 6 " / SISet print speed with the[FEED] or [PAUSE] key.S E S O R T R A N S .NSet the sensor type with the [FEED]or [PAUSE] key.B A K F E E D Y E SCSelect use or non use of reversefeed with the [FEED] or [PAUSE] key.Press the [FEED] key twice.P O I T I O NSH E D A D J U S TATRANSMISSIVEREFLECTIVE(black mark sensor)NONE(consecutive form)(feed gap sensor)X and Y-directions fineadjustment display10 (Print count 10)6" / sec.4" / sec.~~1 (Print count 1)Print parameter setting modeWith reverse feedWithout reverse feed5.3 PARAMETER SETTING MODE5.3.3 X and Y-Directions Fine Adjustment Mode5.3.3.1 Setting Conditions for Adjustment Value Confirmation Print
