6-16. PROGRAM DOWNLOADRS-232CorCentronicsEO18-33002(Revision Date: Jan. 20 '99)6.1 FLOPPY DISK6. PROGRAM DOWNLOADThe main program for the printer has been written onto the flash ROM. If the main program is upgraded,due to the addition/change of the specification, download the main program from the PC to the printerwith the download floppy disks and RS-232C or Centronics interface.6.1 FLOPPY DISK(1) Media: 3.5 inch (2DD)(2) Disk: Program Loader Setup Disks 1 and 2Program Data Disk6.2 SETUP6.3 OUTLINE OF THE PROGRAM DOWNLOAD PROCEDURE(1) Install the Program Loader (Program Loader Setup Disk 1 and 2) in the PC.(2) Copy the prog.bin file in the Program Data Disk to the directory created in step (1).(3) Set the DIP SW3 on the VR PC board to ON and turn the printer power ON.The printer LCD display shows “PROGRAM LOAD.”(4) Run the Program Loader.(5) Start the download.(6) After the download is completed, turn the printer power OFF and restore the DIP SW3 to the formerposition.6.4 DOWNLOAD PROCEDURE1) Install the program loader (Setup Disks 1 and 2) in the PC as indicated on the display.NOTE: The PC should operate Windows 95.Program Loader FDK(Sample) CB-416-T3-QQ/QPProgram LoaderSETUP DISK 125th November 1998FMRM0049901V001.000CB-416-T3-QQ/QPProgram LoaderSETUP DISK 225th November 1998FMRM005001V001.000CB-416-T3ss ss