- 95 -EO1-11115MA-186-100 SERIES1Replenishing Ink to the Store Name StampTurn the Control Lock to the OFF positionusing the Control Key.23To remove the Printer Cover, insert thePrinter Cover Key to the Printer CoverLock, and then turn it 90° clockwise.Remove the Stamp from the Stamp PrintUnit by pulling out toward the rear of theregister with your fingers on the notches ofboth sides as shown in the figure.4Apply ink to the pad on the rear side of thestamp. The amount of the refilling shouldbe adjusted according to the density of theprinted message, but the limit of 2 ccshould not be exceeded. (The ink bottlesupplied contains 5 cc of ink.)NOTES: 1. Replenish the ink drop by drop sev-eral times until the pad does not ab-sorb any more.2. Allow time for ink to saturate thestamp.ZOFFXREGSETInk BottleRear-side Pad of Store Name Stamp
