- 41 -EO1-11115MA-186-100 SERIESProgramming PLUsPLU Table Setting:Condition:To change setting of a PLU: When the required PLU sales total memory is zero (i.e.,when nosales are made or after a PLU Reset Report is taken to reset the sales data of the PLU intozero)To add new PLUs: Any time outside a sale.(refer to “NOTE on Condition” on page 15)Programming Procedure:Use the MA Key to turn the Control Lock to “SET”.Preset Pricemax. 6 digits; 0to 999999 ¢To set Open-price PLUNOTE 2PLU Code max. 3 digits; 1 to500NOTE 1Declaration of Program No.4for PLU Table programming* Repeat for programming other PLUs.(Max. 500 PLUs)( )Depress the [DPTSHIFT] key todesignate theDepartment Nos.21 to 40.Depress the keyof the Depart-ment to which thesetting PLU islinked.NOTE 3ZOFFXREGSETAT/TLDept.4 @/FOR→→→→PLU . . . DPTSHIFTAMT*→ →→ → → → →NOTES 1. When sequentially programming the PLUs, the code specification can be omitted. When it isomitted at the very first PLU, PLU Code “1” is automatically assigned.2. An Open-price PLU always requires a price entry through Numeric Keys in sale entries, and maybe used for an item that frequently changes its price.3. The statuses (Positive/Negative Status, Tax (PST) 1 & 2 Status, GST Status, and Key TypeStatus) of each PLU is decided by the statuses of the statuses of the Department to which the PLUis linked.4. When a PLU is linked to an Other Income Department, an entry of the PLU in a sale will cause anerror.
