- 106 -EO1-11115MA-186-100 SERIESZOFFXREGSET (BLIND)Numeric Key3Zero-amountFormat0 . 0 0. 0for use in US or CanadaAT/TL91 9All Memory ClearIf the register becomes completely inoperative due to battery discharge or malfunction of the programmemory, the All Memory Clear operation must be carried out. When an All Memory Clear is operated, allthe memory contents that have been stored in the RAM will be cleared (i.e., the programmed data and thesales data). Along with the clearing process, the designated zero-amount format is set and “Initial Data”and “Initial Status” for respective programming items are automatically set.Warning: This clear operation deletes all programmed data and sales data stored in the register’smemory. (i.e., the register goes back to initial status.)Operating ProcedureCondition: Any time, outside or during any operation sequence except during Key Setting or Key LocationChanging or System Option Setting procedure.Operation:Use the S Key to turn theControl Lock to “BLIND”.Depress the following Numeric Key according to the display and print format for zero amount and thenation where the register is used:Depress the key.An All Memory Clear receipt is issued.NOTE: When an All Memory Clear is operated, the condition “after all sales data reset” is obtained, just as“Status Clear” or “Sales Memory Clear”. Therefore, no Reset Reports need to be taken for starting anyprogramming operation.All Memory Clear Symbol Line(39 for Numeric 39, 19 for Numeric 19)Receipt Consecutive No. is resetto 0001.(Date and Time remain unreset.)Zero-amount Display & Print Formatdesignated here.Thank youCall again05.- 28.- 9 73 9 H0.0 00 00.11 3 - 0 4
