Menu User guide46Calling up the menu You can access the menu in the following way:Make sure that the printer is switched off.Hold the USER key pressed and power on theprinter by pressing the ON/OFF key.The printer initializes and in the LCD displayappears the message:Menu configurations(User 1/User 2)Every printer is shipped with factory default settings. Basic settingssuch as emulation, character pitch, form length etc., which many appli-cations make use of, are set. At the end of this chapter you will find amenu printout (status page) (Status page (example), page 56) whichshows you the printer’s default settings.Your printer allows you to set and use two independent menu config-urations (User 1 and User 2). If one of your applications for examplerequires an IBM printer while another program works better with anEPSON printer, you can set an IBM emulation configuration with thedesired settings, and set the second configuration as an EPSON emu-lation.The USER key allows you to change fromUser 1 to User 2 and vice versa during opera-tion.EJECTUSERSET UP12STOPEJECTUSERSET UP12STOPMENUUSEREJECTUSERSET UP12STOPONLINEPAPER
