User guide Menu57Menu parameters The following section introduces and explains all the possible menusettings. The default setting is marked by an asterisk (*)Parameter group Parameter Possible settings DescriptionMENUUSERDefault Set Off *AllUser 1User 2All sets all parameters to the default settings.User 1 sets all parameters of User 1 to thedefault settings.User 2 sets all parameters of User 2 to thedefault settings.Coyp User User1 to User2 *User2 to User1Copies the settings of User 1 to User 2 andvice versa.Select User User1 *User2Defines if User 1 or User 2 is loaded after pow-ering on the printer.Change User User1 *User2Defines if the parameter settings of User 1 orof User 2 are changed.Language English *GermanFrenchSpanishItalianSelects the display language.MENUCHARACTERCharacter Pitch 10 CPI *12 CPI15 CPI17 CPI20 CPI24 CPIProportionalSets the characters per inch (character pitch).The higher the parameter the smaller the char-acter spacing.If Proportional is selected, only the actuallyrequired space for the character width is used.Font Draft *CourierRomanSans SerifScriptBoldGothicPrestige EliteOratorOCR-AOCR-BThis parameter selects the character style per-manently.1) Only in Epson and IBM emulation2) Only if MSR-H is installed3) Only for printer model with second serial interface
