User guide Menu47Menu handlingKey functions You can navigate in the current menu using the three keys of the con-trol panel.USER keyPress the USER key to return to the previousparameter group or parameter on the samemenu level.The USER key is also used to change parame-ter settings. (see also STOP key, page 48).If this key is pressed when the first parametergroup or parameter of the respective menulevel is active, the following message appearson the LCD display:Pressing the USER key again will open the lastparameter group or parameter of the samemenu level.By pressing the STOP key you will return tothe previous menu layer (see also STOP key,page 48).EJECT keyPress the EJECT key to select the nextparameter group or parameter on the samemenu level.The EJECT key is also used to changeparameter settings. (see also STOP key,page 48).If this key is pressed when the last parametergroup or parameter of the respective menulevel is active, the following message appearson the LCD display:Pressing the EJECT key again will open thefirst parameter group or parameter of thesame menu level.By pressing the STOP key you will return tothe previous menu layer (see also STOP key,page 48).EJECTUSERSET UP12STOPMENUUSEREJECTUSERSET UP12STOPReturn toPrev.LayerEJECTUSERSET UP12STOPMENUUSEREJECTUSERSET UP12STOPReturn toPrev.Layer
