User guide Menu63Test functionHex Dump With the interface test (Hex-Dump/H-Dump) you can test data trans-mission from the computer to the printer. During this test, the datafrom the computer is printed out in two columns. The text in the leftcolumn is printed in hexadecimal format and in the right column inASCII format.Activating Hex DumpSwitch the printer off.Keep the STOP key pressed and power theprinter on by pressing the ON/OFF key.Keep the STOP key pressed until Hex DumpNO PAPER appears on the LCD display.Insert a sheet of paper. The sheet is drawn in.Send now the test file from your PC to theprinter.The message Hex Dump Printing... is dis-played and the printout is carried out.USER and SELECT key are invalid duringprinting is performed.After printing is done, press the STOP key toprint all remaining data of the line buffer.You can use the STOP key to interrupt the testprintout.EJECTUSERSET UP12STOPEJECTUSERSET UP12STOPHex DumpNO PAPEREJECTUSERSET UP12STOPHex DumpPrinting...
