2-6 User GuidePaper UsageGetting to Know Your PrinterCustom SizesIn addition to the standard sizes of paper you can use, you can also print on custom size paperfrom any tray. The custom size paper must meet the following guidelines.• All Custom sizes must be fed short edge first.• Paper smaller than 3 in by 5 in (76.2 mm by 127.0 mm) or larger than 8.5 in by 14 in(215.9 mm by 355.6 mm) cannot be printed.• Paper smaller than 3.5 in by 5.5 in (88.9 mm by 139.7 mm) must be printed from Tray 1and cannot be duplexed or output to the Offset Catch Tray.Insert paper in the tray so the side to be printed is facing up and the short edge of the paper goesinto the printer first. On the Operator Panel, use the Paper>Media Size/Type Menu to setAuto-Sense OFF and then set Custom Size for the intended tray. Then use your applicationsoftware printer driver to send data to be printed on the installed custom size paper. See section“Custom Size Paper” on page 4-11.When using the EWS, turn Auto-Sense OFF and pressSubmit to gain access to Custom Size settings.Paper TypesThe printer supports the following paper typesPaper Types Fuser Mode RestrictionsPlain Normal NoneTransparency Transparency No duplexHalf speedPre-Punched Normal NoneLetter Head Normal NoneColor Normal NonePre-Printed Normal NoneBond Thick1 NoneLabels Thick1 No duplexCardstock Thick2 No duplexPostcard Thick1 NoneEnvelope Thick3 No duplexHalf speedThick 1 (106-159 gsm) Thick1 NoneThick 2 (160-216 gsm) Thick2 NoneThick 3 Thick3 No duplexHalf SpeedThin (64-67 gsm) Thin None
