4-14 User GuidePaper TabWindows OperationsIf “Load Paper” is the displayed message, the paper may be loaded into any tray. If the papersize being loaded cannot be auto-sensed, then the Operator Panel must be used to configure thepaper size. After the paper is loaded, the printer will automatically resume printing. If youwant to simply continue printing on the default input tray without checking the paper sizerequested, press the START/STOP key to resume printing.If “Load Paper TrayX” message is displayed, then loading the requested paper into theindicated tray will cause the printer to automatically resume printing. If the paper is loaded intoa tray other than the one indicated, then pressing the START/STOP key will allow the printer toresume printing if “Auto Tray Change” is enabled.When both Auto Resize and Media Check are ON, the paper size requested, via the driver, willnot be enforced because Auto Resize overrides the paper size aspect of Media Check. If youwant to enforce a specific paper size, then it is necessary to disable Auto Resize via theOperator Panel’s Paper Menu.To enable media check:1. Select the Paper Options button in the Paper tab within your Printer Properties.The Paper Options window appears.2. Select Media Check.3. Click OK.4. Click OK.When Media Check is disabled:The printer will print from the default paper tray. The size or type of paper in the tray is not afactor in paper tray selection.Skip Blank PagesIf pages exist in your document that do not contain text, you may select not to print them.To skip blank pages:1. Select the Paper Options button in the Paper tab within your Printer Properties.The Paper Options window appears.2. Select Skip Blank Pages.3. Click OK.4. Click OK.
