TallyGenicom 9040 User Manual
                                                                                                                                                        | |
Contents
| 
User Guide 2-7Paper UsageGetting to Know Your PrinterYou should set your printer Media Type to Thick1 or any of the other paper types that useThick1 fuser mode for any paper that is from 106 gsm to 159 gsm. If your paper is 160 gsm to216 gsm, you should set your printer Media Type to Thick2 or Cardstock. If you do not getsatisfactory results using Thick1 or Thick2 on some paper types with rough or uneven surfaces,it is possible you will get improved results using Thick3 because of the lower fuser temperatureand slower paper speed in the printer.The fuser temperature progression isTransparency Thin Thick3 Normal Thick1 Thick2Printing TransparenciesTransparencies can be printed from all trays, but they can not be printed on two sides using theDuplex Module. Only use transparencies designed for laser printers so they can withstand theheat required for fusing. It is possible to damage your printer by using unsupportedtransparencies.Loading transparencies into the trays:1. Remove the tray from the printer.2. Remove all paper from a tray before loading transparencies.3. Fan the stack of new transparencies before putting them in the tray.4. Insert the transparencies into the tray.Place the transparencies in the input tray with the side to be printed facing up. Do not fullyload a tray with transparencies. The printer supports loading 100 transparencies or less ina tray. Handle them by the edges with both hands and avoid getting fingerprints andcreases on them.5. Adjust the paper guides to fit the transparencies.6. Insert the tray firmly into the printer.7. Using the Operator Panel or EWS, select the Transparency Media Type and correct MediaSize for the tray to be used.8. In the printer driver or the computer application program, select Transparency as thepaper type you wish to use.Printing EnvelopesEnvelopes can be printed from all trays. There are 5 sizes of standard envelopes that can beused. They are COM10, COM9, C5, Monarch, and DL. All other envelope sizes must bespecified as custom size. Only use envelopes designed for use in laser printers. The heat fromthe fuser can melt some adhesives and possible damage your printer.Loading envelopes into the trays:Caution: Never use padded envelopes or those with windows or metal clasps. Thesecan damage your printer. |
manualsdatabase
Your AI-powered manual search engine